softzone: PonyProg serial device programmer

Introduction

If you are looking for a simple but powerful programmer you are right, it's here.
PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows95/98/ME/NT/2000/XP and Intel Linux. Its purpose is reading and writing every serial device. At the moment it supports I²C Bus, Microwire, SPI eeprom, the Atmel AVR and Microchip PIC micro.
SI-Prog is the programmer hardware interface for PonyProg.
With PonyProg and SI-Prog you can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.Support PonyProg
PonyProg works also with other simple hardware interfaces like AVR ISP (STK200/300), JDM/Ludipipo, EasyI2C and DT-006 AVR (by Dontronics).

Features

	Support 24C01, 24C02, 24C04, 24C08, 24C16 I²C Bus EEPROM
	Support 24C32, 24C64, 24C65, 24C128, 24C256, 24C512 I²C Bus EEPROM
	Auto detect 24XX EEPROM capacity
	Support 24C325 and 24C645 I²C Bus EEPROM
	Support Siemens SDE2516, SDE2526, SDA2546, SDA2586, SDA3546, SDA3586 EEPROM (as 24XX Auto)
	Support AT17C65, AT17C128, AT17C256, AT17C512, AT17C010 I²C Bus EEPROM
	Support Siemens SDE2506 EEPROM
	Detect the bank roll over capability of some old 24XX EEPROM
	Support AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4414, AT90S4434, AT90S8515, AT90S8535 Flash micro
	Support AT90S2323, AT90S2343, AT90S2333, AT90S4433, AT90S4434, AT90S8535, AT90S8534
	Auto detect AVR microcontroller type
	Support the AVR microcontroller ATmega103, ATmega161, ATmega163, ATmega 323, ATmega128, ATmega8, ATmega16, ATmega64, ATmega32, ATmega162, ATmega169, ATmega8515, ATmega8535
	Support the AVR ATmega44, 88, 168, 164, 324, 644, 640,1280, 1281, 2560, 2561 (untested)
	Support the AVR AT90can32, 64, and 128 (untested)
	Support the AVR ATtiny12, ATtiny15, ATtiny26, ATtiny2313
	Support the AVR ATtiny13, 25, 45, 85, 261, 461, and 861 (untested)
	Read ATtiny12 and ATtiny15 Oscillator Calibration Byte
	Write lock bits to protect the AVR micro from reading
	Write both the Flash and EEPROM memory of the AVR micro at once
	Support the AT89S8252 and AT89S53 micro
	Support 93C06, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86 Microwire EEPROM (C and LC series, the CS serie is not supported yet)
	Support 93C13 (as a 93C06) and 93C14 (as a 93C46) Microwire EEPROM
	Access microwire eeproms in either 8 and 16 bit organization
	Improved support PIC 16C84/16F84 micro
	Support PIC 16F873/874/876/877 and PIC 16F84A micro
	Support PIC 16F873A/874A/876A/877A and PIC 16F627/628 micro (untested)
	Support PIC 12C508/509 micro
	Support PIC 12C671/672 micro (untested)
	Support 25010, 25020, 25040 SPI EEPROM
	Support 25080, 25160, 25320, 25640, 25128, 25256 Big SPI EEPROM
	Support 25642 and 95640 Big SPI EEPROM
	Support NVM3060 eeprom
	Support MDA2061/MDA2062 eeprom
	Support X2444/X2445 eeprom
	Support S24H30 (untested)
	Read/Write Intel hex format file as well as raw binary file
	Read/Write Motorola S-record format file
	Read/Write CSM format file
	Features a custom E²P format file to store the EEPROM characteristics, an editable comment and memory content all together with CRC
	Enhanced buffer edit, text and hexadecimal
	Work with Windows95/98/ME and WindowsNT/2000/XP and Linux*
	Reload file button
	Fill buffer command
	Security bits editing for AVR, AT89S and PIC
	Serial number programming
	Script files for batch programming
	Improved speed with WinNT/2000/XP with a driver for direct I/O.

*Not all interfaces are supported in every operating system, for more informations look at the documentation.
New untested devices may not work. I'm waiting for the samples to test them.

Screen dump